Unit Of Measure Setting; Dive Planning ( ); Quick Display Of Set Data ( ) - Cressi Archimede Manual De Instrucciones

Ocultar thumbs Ver también para Archimede:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

2.3.4. - Unit of Measure Setting.

The Archimede Cressi-sub dive computer can calculate and
give you the values in metric units (depth values expressed in
meters and temperature expressed in °C), or in Imperial units
(depth in feet and temperature in °F).
If you want to change the unit of measure, press the M
(Mode) button to access the (
the A+B buttons simultaneously and keep them pressed for
about 15 seconds. At this point the new unit of measure that
you have just set will be displayed.
Press the M (Mode) button to go back to the main screen
(fig. 1).
2.4. - Dive Planning (
On surface, you can enter the (
quick idea of the diving time allowed at the various depths,
using the set Nitrox supply and without having to stop for
decompression. In the case of repeated dives, residual
nitrogen levels are considered, therefore lower time values
are set. By pressing the M (Mode) button twice, you enter
the (
) function, as indicated on the alphanumeric dis-
play. The screen will show (fig. 7, air; fig.7.1., Nitrox, both with
desaturation under way) the safety curve (no decompres-
sion) limits displayed for the various depths, starting from
30ft, with manual depth increases of 10ft each, every time
you press the B. (
)button, or with manual depth decreas-
es of 10ft each, every time you press the A (
Press the M (Mode) button to go back to the main screen
(fig. 1).
) screen (fig. 3).Then press
).
) function, to get a
) button.
Related topics:
• 3.1.1. - No Decompression Dive.
• 4.1.1. - Surface Interval Time.
2.5. - Quick Display of set data (
With the INFO (
) icon on the UFDS display of Archimede
Cressi-sub dive computer, when on the surface, you can dis-
play all set parameters for your dive in a quick and easy way
(fig. 8). By pressing the A (
display the maximum PO2 value and the corresponding max-
imum depth (expressed either in m or ft); the safety factor, if
any has been set, (SF0/1); the Nitrox percentage and the
corresponding (
Nitrox
to take a dive with air.
Related topics:
• 3.1.
- DIVE WITH AIR
• 3.3. - DIVE WITH NITROX.
137
).
) button, your dive computer will
) icon or the (
) icon if you are going
Tabla de contenido
loading

Tabla de contenido