Before Diving; Dive Set Mode; Setting Of Dive Parameters - Cressi Leonardo Manual De Istrucciones

Ocultar thumbs Ver también para Leonardo:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

16

2 - BEFORE DIVING

DIVE-SET MODE: Setting of dive pa-
rameters.
Once switched on, the computer is in PRE
DIVE screen mode. The settings for the next
dive are displayed here. The parameters can be
changed by repeatedly pressing the button and
accessing the DIVE SET (DIVE-S) mode, which
enables to select the dive parameters related to:
Partial Oxygen Pressure (PO2)
Nitrox-Percentage or Fraction of oxygen
(FO2)
Dive Safety Factor (SF)
Altitude (ALT.)
Deep Stop
WARNING: If the screen displays
the battery icon with a single segment
on, the computer MUST NOT BE
USED. If it is displayed during a dive,
stop the dive and return to the surface.
The battery can be replaced by the
user (refer to the relevant chapter).
PARTIAL
OXYGEN
(PO2)
(im. 4)
Leonardo is factory set with a Partial Oxygen
Pressure (PO2) value of 1.4 bar for both air
dives and Nitrox dives, in order to ensure the
maximum safety during any type of dive. Ho-
wever, it is possible to change the PO2 setting
on values between 1.2 bar (included) and 1.6
bar (included), with steps of 0.1 bar, obtained
each time the button is pressed. If it is neces-
sary to increase the safety margin of the dive, it
is possible to set PO2 to lower values, up to a
PRESSURE

Hide quick links:

Tabla de contenido
loading

Tabla de contenido