Idiomas disponibles
Idiomas disponibles
1 609 92A 875 • 27.10.22 • T
can break, negatively influence the cut, or lead
to kickback.
Do not brake the saw blade to a stop by ap-
u
plying side pressure after switching off. The
saw blade can be damaged, break or cause
kickback.
Ensure that the material is securely
u
clamped. Do not support the workpiece us-
ing your hands or feet. Do not touch any
objects or the floor with the saw while it is
running. There is a risk of kickback.
Use suitable detectors to determine if there
u
are hidden supply lines or contact the local
utility company for assistance. Contact with
electric cables can cause fire and electric
shock. Damaging gas lines can lead to explo-
sion. Breaking water pipes causes property
damage.
In case of damage and improper use of the
u
battery, vapours may be emitted. The bat-
tery can set alight or explode. Ensure the
area is well ventilated and seek medical atten-
tion should you experience any adverse ef-
fects. The vapours may irritate the respiratory
system.
Do not open the battery. There is a risk of
u
short-circuiting.
The battery can be damaged by pointed ob-
u
jects such as nails or screwdrivers or by
force applied externally. An internal short
circuit may occur, causing the battery to burn,
smoke, explode or overheat.
Only use the AMPShare battery in the
u
manufacturer's products or those of the
AMPShare partners. This is the only way in
which you can protect the battery against dan-
gerous overload.
Protect the battery against heat,
e.g. against continuous intense sun-
light, fire, dirt, water and moisture.
There is a risk of explosion and short-
circuiting.
Product Description and
Specifications
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or
serious injury.
Please observe the illustrations at the beginning
of this operating manual.
Do not use this power tool until you have
thoroughly read and fully understood this
operating manual. Pay additional attention to
the applicable national health and safety reg-
ulations.
English
Intended Use
English
The power tool is suitable for sawing wood,
plastic, metal and building materials on a firm
surface. It is suitable for straight and curved cuts.
When using designated suitable bi-metal saw
blades, flush cutting is also possible. The saw
blade recommendations are to be observed.
Product Features
English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Saw blade
(2) Base plate
(3) Locking sleeve for saw blade
(4) Rechargeable battery
(5) Lock-off function for On/Off switch
(6) On/Off switch
(7) Worklight
(8) Rechargeable battery release button
(9) Handle (insulated gripping surface)
(10) Saw blade receptacle
a) Accessories shown or described are not included
with the product as standard. You can find the
complete selection of accessories in our accessor-
ies range.
Technical Data
English
Reciprocating saw
Article number
Rated voltage
A)
No-load stroke rate n₀
Tool holder
Stroke
Max. cutting depth
– in wood
– in steel (unalloyed)
– pipe diameter
Weight according to
EPTA-Proced-
ure 01:2014
Recommended ambi-
ent temperature during
charging
Permitted ambient
temperature during op-
C)
eration
and during
storage
Recommended re-
chargeable batteries
en
15
a)
a)
ASAS18-21KAS
7 133 ...
V=
18
–1
min
0–3050
SDS
mm
21
mm
200
mm
16
mm
100
B)
kg
2.3–3.3
°C
0 to +35
°C
–20 to +50
GBA 18V...
ProCORE18V...
