Idiomas disponibles
Idiomas disponibles
− To exit the code entry phase and return to
normal functioning press the 'X' key for at least 3
seconds.
NOTE 1: instead of scrolling all the codes with the
Arrow keys, it is possible to find the first
free space holding down the 'Call' key for
at least 3 seconds.
NOTE 2: to delete a lock release code, reprogram
this to '00000000'.
COMPLETE ERASURE
In some cases, it may be useful to delete all the lock
release codes inserted (for example to reinstall the
same device in another building).
Complete erasure of the lock release codes is
possible only using the keyboard:
− Enter '00' followed by the 4-digit password for
access to the configuration (NOT that for lock
release code management). The main menu is
displayed:
<LANGUAGE><CONFIG>
<ID><TEST><ESC>
− On the keyboard press the 'Key' key and '5' at the
same time. The display will show:
Erase ALL?
− Answering 'YES', all the Lock Release Codes and
all the Names (see below) stored in the device will
be deleted. Answering 'No', another two prompts
will be displayed for confirmation of ONLY the
Names or ONLY the Lock Release Codes:
Erase names?
Erase lock release?
− Answering 'No' to the first prompt and 'Yes to the
second, ONLY the Lock release Codes will be
deleted.
30
<Y> <N>
<Y> <N>
<Y> <N>
NAME MANAGEMENT
It.is.possible.to.enter.up.to.740.names.
Each name includes the following information:
− name of the user (maximum 32 alphanumeric
characters distributed on two 16-character lines);
− user code, (between '1' and '9999');
− lock release code, numeric only (between '1' and
'99999999').
It is possible to proceed in such a way that several
names (different from each other) correspond to the
same call (in the case of several people living in the
same apartment).
If the call code is to be displayed beside the name,
simply save the call code also in the 32 characters
dedicated to user name.
MANAGEMENT METHODS
Names can be managed:
1) Using a Personal Computer and the
.
Ref..1038/56.Programming.terminal.
2) Using the Ref. 1038/56 Programming Terminal,
connected locally or at any other point of
the installation, mainly for modifications,
cancellations and short entries
3) Locally, from keyboard, mainly for modifications,
cancellations and short entries. In this case, the
password for programming of the names and lock
release codes must be known (this is DIFFERENT
from the configuration access password).
MANAGEMENT USING PERSONAL COMPUTER
AND 1038/56 TERMINAL
The best way to manage the names is to use the
DVOICE Personal Computer programs specifically
designed to simplify insertion and maintenance
of the names of one or more sites. The DVOICE
program can be downloaded free of charge from the
Urmet Internet site (http://www.urmet.com).
The installation technician (or building administrator)
may therefore proceed:
− to save the names of a site on his own PC;
− transfer the database of names from the PC to
the 1038/56 Programming Terminal;
− inject the database of names in one or more Call
Modules of the site (connecting the terminal at
any point of the site).
The various operations are described in detail below.
DS1038-030
