Idiomas disponibles
Idiomas disponibles
(Fig. 6A).
Always make sure that the straps are fastened correctly. To unfasten
the strap, press and pull the side prongs.
WARNING: To guarantee the safety of your child, the safety harness
must be fastened at all times.
To make sure that the belts are fastened properly to the anchoring
points, after placing your child inside the stroller, pull the end parts of
the belts firmly.
ADJUSTING THE BACKREST
The backrest can be adjusted to 4 positions.
7. To lower the backrest, lift the adjusting handle located on the rear
of the backrest (Fig. 7). To raise the backrest, simply lift it to the
desired position.
WARNING: The child's weight can make these operations more
difficult.
REAR BRAKES
The rear wheels have linked brakes, which can be applied simulta-
neously on both rear wheels by using the support tube.
8. To activate the brakes, press down on the pedal located centrally
(Fig. 8). To release the brakes, press the pedal in the opposite di-
rection (Fig. 8A).
SUN CANOPY
The hood is already installed on the stroller.
9. To open and adjust the canopy use the front arch (Fig. 9). The
canopy can be extended by opening the zipper (Fig. 9A). Should
you wish to remove the canopy from the stroller, open the zip
wrapped around the tube above the backrest (Fig. 9B), remove
the elastic (Fig. 9C) and, using a sharp object as a lever, lift the
plastic component indicated while at the same time pulling up
on the metal rod (Fig. 9D). Complete the operation by undoing
the two buttons on the back of the backrest (Fig. 9E).
ADJUSTABLE LEGREST
The legrest can be used in 2 positions.
10. To use the legrest in the horizontal position simply push it up-
wards. To lower it, use the button located under the legrest (Fig.
10).
FITTING AND REMOVING THE STROLLER LINING
To remove the lining from the seat, follow the steps below:
11. Detach all the velcro fasteners and snap buttons that connect
the backrest to the hood (Fig. 11-11A) and remove the straps on
both sides from the plastic hooks that attach the backrest to the
handle of the frame (Fig. 11B).
12. On the sides of the seat, remove the velcro fasteners (Fig. 12)
and slip the fabric tab out from the plastic ring on the frame
(Fig. 12A). Complete this operation for both sides of the stroller.
13. Unfasten the two buttons under the legrest (Fig. 13), remove
the fabric from the frame and then the elastic strap (Fig. 13A).
Remove the velcro on the elastic strap, located under the seat,
and remove the strap from the buckle (Fig. 13B). Remove the
pocket from the adjustment button for the backrest and pull all
the fabric upward (Fig. 13C).
To put the lining back on the stroller follow the same steps back-
wards.
FOLDING THE STROLLER
WARNING: When unfolding and folding this product, make sure
that your child or other children are at a safe distance.
Make sure that during these operations the moving parts of the
stroller do not come into contact with your child.
Before closing the stroller, ensure that the storage basket is empty.
The stroller has a closing device that can be used with one hand.
14. To close the stroller, push switch "A" to the left and simultane-
ously press button "B" (Fig. 14); push down on the handle and
the stroller will close automatically (Fig 14A-B). The stroller will
automatically lock in the closed position. When closed, the stroll-
er stands on its own. To make the stroller even more compact
when closed, the bumper bar can be turned towards the handle
(Fig. 14C).
ACCESSORIES
WARNING: The accessories described below may not be included
in some product versions. Carefully read the instructions for the ac-
cessories that came with the model you have purchased.
SHOULDER STRAPS AND CROTCH STRAPS
The stroller is fitted with padded shoulder straps and a soft crotch
strap to ensure the safety and comfort of your child.
15. For assembly, insert the shoulder straps (Fig. 15) and the crotch
strap in the relevant padding (Fig. 15A).
WARNING: Adjust the waist belt if necessary by pressing on the
buckles.
WARNING: To guarantee the safety of your child, the safety harness
must always be fastened.
RAIN COVER
16. To fit the rain cover, fasten the straps around the stroller's frame
in the positions shown in Fig. 16 (steps to be repeated on both
sides of the stroller).
When you have finished using the rain cover, allow it to dry properly
if it is wet.
WARNING: The rain cover cannot be used on the stroller without
the hood being extended, as it may cause suffocation.
WARNING: When the rain cover is fitted on the stroller, never leave
it exposed to direct sunlight with your child inside, as the tempera-
ture will rise considerably.
USING THE CAR SEAT ON THE STROLLER
The Goody XPlus stroller can be used with the Kory car seat with Fast
In attachment, using the appropriate adaptors (sold separately).
WARNING: FOR THE ASSEMBLY AND/OR USE OF THE ITEMS LISTED
ABOVE, REFER TO THE RELEVANT MANUALS.
WARRANTY
The product is guaranteed against any lack of conformity under nor-
mal use as specified in the instructions. The warranty shall not there-
fore apply in the case of damage caused by improper use, wear or
accidental events. For the duration of the warranty on conformity
defects please refer to the specific provisions of applicable national
laws in the country of purchase, where appropriate.
13
