Idiomas disponibles
Idiomas disponibles
INSTALLATION
DANGER:
Installation, especially overhead installation, requires extensive experience, relevant &
up-to-date expertise and competence, including the calculation of working load limits,
the installation material used and regular safety checks of all installation materials
and floodlights! If you do not have these qualifications, do not attempt to carry out an
installation yourself, but use the help of appropriately qualified specialist companies!
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
Thanks to the adjustable stand or mounting feet, the PIXBAR
position on a flat floor (e.g. as an uplight).
Mounting a PIXBAR
®
Mounting on a truss is done using optionally available truss clamps, which are either attached
directly to the mounting feet (1), or to optionally available Omega mounting brackets (part number
CLOMEGABRACKET1). The mounting feet can be moved on the housing of the PIXBAR
this, loosen the middle of the five hexagon socket screws (2), move the foot to the desired position
and tighten the screw again. The direction of radiation can be adjusted using the tommy screws
(3) on the mounting feet. Ensure that the connections are tight and that the PIXBAR
come loose. When mounting the PIXBAR
of the safety lugs provided (4). When mounting several docked PIXBAR
each individual PIXBAR
secured with a suitable safety rope.
1
3
2
on a truss
G2 overhead, secure it with a suitable safety rope to one
®
G2 must be attached separately to the truss with the mounting feet and
®
4
G2 can be set up in a suitable
®
G2 horizontally overhead,
®
1
4
2
G2. To do
®
G2 cannot
®
3
23
