Cameo PIXBAR G2 SMD Manual De Usuario página 12

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
1
7
3
1 POWER IN
IP65 mains input socket with rubber sealing cap (TRUE1 compatible). Operating voltage 100 - 240
VAC / 50 - 60 Hz. Connection via supplied power cable (when not in use, always close with the
rubber sealing cap).
2 POWER OUT
IP65 mains output socket with rubber sealing cap (TRUE1 compatible). Facilitates power supply to
other CAMEO spotlights. Ensure that the total current consumption of all connected devices does
not exceed the value specified on the device in amperes (A) (when not in use, always close with
the rubber sealing cap).
3 DMX IN
Male IP65 5-pin XLR socket for connecting a DMX control device (e.g. DMX console, when not in
use always close with the rubber sealing cap).
4 DMX OUT
Female IP65 5-pin XLR socket for forwarding the DMX control signal (when not in use, always
close with the rubber sealing cap).
5 OLED DISPLAY
The OLED display shows the currently activated operating mode or the current DMX address
(main display), the menu items in the menu and the numerical value or operational status in
certain menu items.
6 TOUCH-SENSITIVE CONTROL PANELS
MENU- Press MENU to access the main menu. Press again or repeatedly to return to the main
screen.
UP and DOWN – Select the menu items in the main menu (DMX address, operating mode, etc.)
and in the sub-menus using UP and DOWN. Change value or status in a menu item, e.g. DMX
address. To quickly change a value, such as the DMX start address, press and hold UP or DOWN.
12
5
6
2
8
4