Cameo PIXBAR G2 SMD Manual De Usuario página 17

TIMER FUNCTION
The timer function allows the stand-alone mode Static to be timer controlled in such a way that
the fade-in time can be set from 0 to 60 minutes, the dwell time from 1 to 24 hours and the
fade-out time from 0 to 60 minutes. After activation of the timer function, the timer control will be
implemented upon the next system start.
Starting from the main display, press MENU to enter the main menu. Select Stand Alone, confirm
the selection, then select Timer and confirm again. Select the setting On under Timer and
confirm. For the individual timer control settings, select Fade In, Dwell Time or Fade Out and
confirm. You can now set the respective value as desired. Confirm all entries. To deactivate the
timer function, select the setting Off under Timer and confirm the entry.
PLEASE NOTE:
The timer function is suitable for use in master/slave operation via cable and W-DMX
EDIT SCENE (Edit Scene)
The eight scenes available in the Play Scene/Loop stand-alone mode can be individually edited.
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN you
now select the menu item Stand Alone, confirm with ENTER, then select Edit Loop and confirm
once again. Select the desired scene (Scene 1 - 8) and confirm the selection. Now select the
menu item you want to edit, confirm the selection, set the desired value and confirm the entry.
EDIT LOOP (Edit Loop)
Brightness, step duration and fade time can be set separately for all eight loops. Starting from the
main display, press MENU to enter the main menu. Using UP and DOWN you now select the menu
item Stand Alone, confirm with ENTER, then select Edit Loop and confirm once again. Now
select the desired loop for editing and confirm the selection.
.
™
17