Idiomas disponibles
Idiomas disponibles
Plug on the fan to a AC 220-240V 50-60Hz power supply, the fan will start with a beep sound when
power supply.
Press
on to turn on the fan. To turn off the heater, press
Note: All operation can be done by remote controller.
Fan setting
Press
to set the fan mode, The display will shows SF/F1/F2/F3/F4.
SF means sleeping mode with soft fan.
Oscillation
Press
one time to start the oscillation function, press again to stop this function.
Timer off function
Press
for more than 3 seconds, the display will show "0H", press again to set the timer off from
1H, 2H...9H, to close the timer-off function, please set the timer to "0H".
CLEANING & MAINTENANCE
To safely take care of your fan, please remember to follow these instructions below:
1. Always remove the plug from the socket-outlet, and allow the fan to stop completely before
cleaning the fan.
2. Do not allow water to drip on, or enter into the fan housing.
3. Always use a soft cloth, moistened with a mild soap solution.
4. Do not use any of the following agents as a cleaner: Gasoline, Thinners, or Benzene.
5. In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire hazard or
electric shock.
Fan Cleaning
Clean the fan grill, housing and base with a soft damp cloth. Do not attempt to remove the fan blades.
Please use caution around the motor housing area. Do not allow the motor, or other electrical
components to be exposed to water.
Fan Storage
When storing your fan in the off-season, it is important to keep it in a safe dry location. It is important
to protect the fan head from any dust. We strongly recommend using the original box, when storing
the fan away.
again.
20
