Idiomas disponibles
Idiomas disponibles
• ENGLISH •
USE
THE STROLLER CAN BE WHEELED ALONG LUGGAGE-STYLE WHEN CLOSED (fig. 59)
Pull the stroller backwards to turn the front wheels lengthwise.
Adjust the handlebar to its widest position, see paragraph "Adjusting the handlebar".
Fold up the stroller, see paragraph "Stroller closure".
USING THE TRAVEL SYSTEM ACCESSORIES
The TicToc pushchair can be used with the following travel system accessory, TicToc infant car seat.
Remove the seat from the chassis (see the paragraph "Fitting the seat").
Engage the stroller parking brake (fig. 34).
USING THE INFANT CAR SEAT "TicToc i-Size (type B001)" optional, sold separately (fig. 60).
IMPORTANT: the travel system accessory must be secured to the chassis only in the parent facing.
CAR SEAT COMPONENT
Fitting the adapter (fig. 61): Align and insert the right and left adapter into their housing on the stroller frame.
Press until a click is heard indicating that the adapter has been secured correctly.
WARNING: Before use, always make sure that both the adapters have been secured correctly to the chassis. When lifted
they must not detach from the chassis.
Removing the adapters (fig. 65): press button "a" to remove the adapter.
Fitting the accessory (fig. 62, 63): Align the coupling device of the car seat and press downwards, a click will indicate that
the carrycot has attached correctly to the stroller frame. Make sure that the accessory has been fastened correctly on
both sides.
WARNING: Before use, always make sure that the accessory has been secured correctly. When the accessory is lifted
upwards it must not detach from the pushchair chassis.
Removal of car seat (fig. 64): Put the car seat handle in the upright position, pressing the buttons on the side. See the
manual supplied with the car seat.
With one hand, grasp the car seat handle and, with the other, press button "A" alternately on both upper sides of the car
seat and remove the car seat by lifting it using the handle.
30
