Idiomas disponibles
Idiomas disponibles
BEFORE USING THIS PRODUCT
SET UP INSTRUCTION
Place the BIKE in the area where it will be used. It is recommended that the BIKE be placed on an equipment mat. An
area 4 feet wide * 6 feet long is required for safe operation of the BIKE. Make sure that adequate space is available for
access to and passage around the BIKE.
LEVELLING
Adjust the levelling caps on the Front stabilizer at the back so that the BIKE sits on the floor without rocking.
FUNCTION INSPECTION
Visually inspect the BIKE to verify that assembly is as shown in the above illustration. Check the function of the BIKE
by turning the crank slowly through one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB (A) and verify that it functions properly and the resistance changes.
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB (A) clockwise.
To decrease the load, turn the TENSION KNOB (A) counterclockwise.
A
A
47
INDOOR BIKE BESP-X7
l evel i ng caps
leveling caps
Equipment Mat
Equipment Mat
(not included)
(not included)
EN
