Idiomas disponibles
Idiomas disponibles
STEP 4:
The Right pedal (10R) has R stamped on the
end of the pedal shaft. The Right pedal (10R) has right
hand threads and is tightened by turning clockwise. The
Left pedal (10L) has L stamped on the end of the pedal
shaft. The Left pedal (10L) has left hand threads and is
tightened by turning the pedal shaft counter clockwise.
Thread the Right pedal (10R) to the Right crank (9R) in
the direction shown. Start by screwing in by hand, and
only use the spanner to tighten when the threads have
fully engaged. Tighten the pedal securely. Refer to the
detail view. The shoulder of the Pedals (10L&R) should
be in contact with the Crank arm (9L&R), when securely
tightened. Only use the Bike when the pedals are fully
tightened.
NOTE
- The Left pedal (10L) has L stamped on the end of the pedal
shaft. Screw in the pedal shaft COUNTER-CLOCKWISE.
- The Right pedal (10R) has R stamped on the end of the
pedal shaft. Screw in the pedal shaft CLOCKWISE.
STEP 3:
Attach the Seat (19) to the Seat post (3) using
3 sets of Flat washer (Ø8) (18) and Nylon nut (M8) (17).
Insert the Seat post (3) into the Main frame (1) and
secure with the Adjustment knob (11).
NOTE
- Make sure that the pin on the Adjustment knob (11) is
inserted into one of the holes in the Seat post (3).
- The Adjustment knob (11) should be screwed in tight to
make the Seat post (3) fit securely in the Main frame (1).
45
INDOOR BIKE BESP-X7
EN
