Silvercrest SMW 800 C2 Instrucciones De Uso página 67

Idiomas disponibles

Idiomas disponibles

Remove splashes or soiling. Clean the door,
both sides of the viewing window, door seals
and adjacent components with a damp cloth.
Do not use abrasive cleaning agents.
If condensation accumulates on or around the
outside of the door, wipe it off with a soft cloth.
This can happen if the microwave is operated in
extremely humid conditions.
GB
Clean the glass plate 2 regularly. You can also
MT
clean the glass plate 2 in the dishwasher or in
hot water with a little washing-up liquid.
Wipe the rotator assembly 3 off with a damp
cloth.
Clean the grill stand e in hot dishwater and
dry it well.
Remove odours regularly. Put a deep microwave
bowl with a cup of water, juice and peel of a
lemon into the microwave. Heat for 5 minutes.
Wipe off thoroughly and rub dry with a soft
cloth.
If the bulb in the microwave needs replacing,
arrange for it to be exchanged by a dealer or
consult our Service Department.
Storage
Store the cleaned appliance in a clean, dust-free
and dry place.
Troubleshooting
There is nothing on the display 1.
The plug is not inserted into a mains power
socket. Check the plug.
The mains power socket is defective. Try another
mains power socket.
The display 1 is defective. Contact Customer
Service.
64
The appliance does not respond to pressing
the buttons.
The Child lock is activated. Deactivate the Child
lock (see chapter "Operation").
The appliance does not start the cooking/
heating process.
The door is not properly closed. Close the door
properly.
The plug is not inserted into a mains power
socket. Connect the plug to the power supply.
The glass plate 2 makes a loud noise when
turning.
The glass plate 2 is not correctly positioned
on the rotator assembly 3.
Centre the glass plate 2 on the rotator
assembly 3.
The rotator assembly 3 and/or the fl oor of the
cooking chamber are dirty. Clean the rotator
assembly 3 and the fl oor of the cooking area.
SMW 800 C2
loading