KitchenAid 5KFP1644 Manual Del Propietário página 5

PRODUCT ASSEMBLY
ATTACHING THE WORK BOWL
Before First Use
Before using your Food Processor for the first time, wash the Bowls and accessories as
described in the "Care and Cleaning" section.
1. Be sure the Food Processor is turned off, unplugged, and placed on a level surface.
2.
Place the Work Bowl on the base, as shown.
3.
Turn Work Bowl to lock it on the base.
NOTE: Liquid level graphics on the side of the bowl indicate the maximum recommended
levels for thick and thin liquids in the Food Processor.
ATTACHING THE LID AND SAFETY LOCK
1.
Install the lid, aligning the tabs and locking it into place. The Ultratight Seal is spill
resistant.
2. The largest section of the 3-part Food Pusher must be inserted for the Food Processor to
run.
USING THE 3-IN-1 FEED TUBE
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputation or cuts.
Before Use
Before operating the Food Processor, be sure the Work Bowl, Blades, and lid are properly
assembled on the Food Processor base.
1. Use the entire Feed Tube and the large Food Pusher to process large items.
2.
Use the medium Food Pusher in the Feed Tube to process smaller items.
3.
Use the small Food Pusher to slice or shred the smallest, thinnest items.
4. Use the drizzle hole in the small Food Pusher to slowly drizzle oil or other liquid ingredients
into the Work Bowl.
WARNING
Rotating Blade Hazard
5