Berner BACHDD-3 BL Manual Original página 25

TECHNICAL DATA
Type
Production code
Art.
Voltage battery pack
No-load speed, 1st gear
No-load speed, 2nd gear
Impact range, 1st gear
Impact range, 2nd gear
Torque (5,0 Ah battery)
Drilling capacity in wood
with flat bit
with auger bit
with hole saw
with selfeed bit
Drilling capacity in brick and tile
Wood screws (without pre-drilling)
Drill chuck range
Weight according EPTA-Procedure 01/2014 (2.0 Ah ... 9.0 Ah)
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Always wear ear protectors!
Vibration information: Total vibration values (vector sum in the three
axes) determined according to EN 62841.
Vibration emission value a / Uncertainty K
h
Impact drilling into concrete
Drilling into metal
Screwing
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the accessories, keep
the hands warm, organization of work patterns.
WARNING
Read all safety warnings, instructions,
illustrations and specifications provided with this power tool. Failure
to follow all instructions listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
DRILL SAFETY WARNINGS
Safety instructions for all operations
Wear ear protectors when impact drilling. Exposure to noise can
cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control can
cause personal injury.
Brace the tool properly before use. This tool produces a high output
torque and without properly bracing the tool during operation, loss of
control may occur resulting in personal injury.
Hold the power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory or fasteners may contact
hidden wiring.
Cutting accessory or fasteners contacting a "live" wire may make
482 064 - BACHDD-3 BL 18V.indd 25 482 064 - BACHDD-3 BL 18V.indd 25
BACHDD-3 BL 18V
Cordless percussion drill/driver
BACHDD-3 BL 18V 01 00001- 99999
1000635
18 V
0-500 min
0-2100 min
0-7800 min
0-33000 min
158,2 Nm
38 mm
38 mm
89 mm
65 mm
15,88 mm
16 mm
1,6 – 13 mm
1,9...2,6 kg
-18...+50 °C
BBP18V-X, BBPP 18V-X
BBC 14,,4-18V, BBC-2 14,4-18V, BBCF 14,4V-18V
98,78 dB(A) / 3 dB(A)
106,78 dB(A) / 3 dB(A)
11,3 m/s / 1,5 m/s
2
1,85 m/s / 1,5 m/s
2
1,48 m/s
2
exposed metal parts of the power tool "live" and could give the operator
an electric shock.
Safety instructions when using long drill bits
Never operate at higher speed than the maximum speed rated of the
drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely
without contacting the workpiece, resulting the personal injury.
Always start drilling at low speed and with the bit tip in contact with
the workpiece. At higher speeds, the bit is likely to bend if allowed to
rotate freely without contacting the workpiece, resulting the personal
injury.
Apply pressure only in direct line with the bit and do not apply
excessive pressure. Bits can bend causing breakage or loss of control,
resulting in personal injury.
25
-1
-1
-1
-1
2
2
/ 1,5m/s
2
ENGLISH
31.05.2023 10:04:06 31.05.2023 10:04:06