Idiomas disponibles
Idiomas disponibles
Questions?
BeforeYou
Call for Service...
PROBLEM
POSSIBLE
CAUSE,
TOP
BURNERS
DO
NOT
I..IGHT
OR DO NOT
BURN
EVENLY
BURNER
FLAMES
VERY
LARGE
OR YELLOW
SURFACE
BURNERS
HGHT
BUT
OVEN
DOES
NOT
* Make
sure electrical plug
is plugged
into a live power
outtet.
o Burner
holes on the side or around
the top of burner
may be clogged.
Remove
burners
(on models
with standard
twin burners)
or burner
heads
(on models
with sealed burners)
or burner
caps on spill-proof
models,
and
clean them with a sewing
needle
or twist-tier
Make
sure you do not enlarge
the holes. On spill?roof
models,
ched_ electrode area for burned-on
food or grease.
- Make sure the drip pans (on some models) are installed
correcfl)_
° Pilot(s)
is (are) not lit (on standing
pilot
models).
See the Lighting
Instructions
for Standing
Pilot Models
section
in Surface
Cooking.
"If range is connected
to LP gas, contact
the person
who installed
your range
or made
the conversion.
The oven gas shut-off
valve may have accidentally
been moved
during
cleaning
or moving.
To check the oven gas shut-off
Valve on standard
twin burner
models,
raise the
cooktop
and look for the gas shut-off
lever at the extreme
right rear corner.
Follow
the directions
in box A or B that match
your regulator
type.
Lever
shown
closed//
Standard Twin Burner Models
Lever shown closed!
Standard Twin Burner Models
To check the oven gas shut-offvalve
on sealed burner
models,
remove
the storage
drawer,
broiler
drawer
or kick panel and look for the gas shut-
off lever at the back of the range.
\
Lever shown
]
\
closed,
PULL /
Sealed Burner Models
4O
