Idiomas disponibles
Idiomas disponibles
applications. Dust or breathing masks
should filter the dust that is created dur-
ing operation. Wear hearing protection
in addition. If you are exposed to loud
noise for a long time, you may suffer
hearing loss. Wear protective gloves in
addition where appropriate.
• If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or his agent in order to
avoid a safety hazard.
• This device is not intended for
use by people with restricted
physical, sensory or mental fac-
ulties or those who do not have
sufficient experience or knowl-
edge of it.
• Do not allow yourself to be lulled
into a false feeling of security
and do not disregard the safety
rules for power tools, even if you
are familiar with the power tool
after using it many times. Acting
carelessly can result in serious injuries
within fractions of a second.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Ear damage if working without ear pro-
tection.
c) Eye damage if no suitable eye protec-
tion is worn.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Operation
Caution! Risk of injury!
- Always remove the mains plug
before working on the tool.
The mains cable is to run over the us-
er's shoulder during the use of the pol-
ishing machine to avoid contact with
the polished surface. This is to prevent
scratches from the mains cable.
Tighten cover on the
polishing disc
1. Align the polishing disc (3) upwards.
2. Using both hands, grab hold of a
towelling cover (5) or a synthetic fur
cover (4) and expand the elastic band
outwards.
3. Put the cover (4/5) on a part of the
polishing disc (3) over the edge of the
polishing disc. Pull the cover around
the edge.
4. Fit the cover (4/5) in centrally and
tightly around the polishing disc (3).
Switching on and off
Make sure that the power supply
voltage matches the voltage rating
indicated on the device's type plate.
GB
MT
21
