Fimar TOP 3 Uso Y Mantenimiento página 60

CONTROL DESCRIPTIONS
The appliance is equipped with the listed
control devices, required to run its main
functions.
A) Main switch: used to turn the appliance
on and off.
Pos. 0: Appliance off
Pos. 1: Appliance on
B) Selector: used to select the number of
resistances to be turned on.
C) Potentiometer: used to adjust trans-
port mat speed.
D) Indicator light: when on, the electrical
resistances are on.
GB
RECOMMENDATIONS FOR USE
1 - Introduce food product in the processing chamber.
2 - First rotate the main switch (A) to position "I" to turn on the appliance and then se-
lector (B) to set the number of electrical resistances to be turned on.
The indicator light turns on.
Caution - Precaution
To avoid burn hazards, place and remove food products with specific utensils.
For first appliance use, remove any protective film lining and run at maximum tem-
perature (about 15 minutes) without food product to eliminate any unpleasant
odours. Wait until the appliance cools and, if odour persists, repeat the operation.
For rear product ejection, open the door.
- 22 -
TOC-TOCS TOASTER
D
B
A
C
English language