Idiomas disponibles
Idiomas disponibles
Using the Food Processor
Rotating Blade Hazard
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in
amputation or cuts.
Before Use
Before operating the Food Processor, be
sure the work bowl, blades, and work bowl
cover are properly assembled on the Food
Processor base (see "Preparing the Food
Processor for Use" starting on page 8).
Food Pusher Interlock
The food pusher is part of the safety
interlock system. The Food Processor will
not run unless the large pusher is inserted
to the maximum fill line on the feed tube
(approximately halfway down).
Maximum
Liquid
Level
This line on the work bowl indicates
the maximum level of liquid that can be
processed by the Food Processor.
ii!i
Turning the Food Processor
On and Off
To turn on the Food Processor, press
the ON Button. The unit will run
continuously and the indicator light
will glow.
2. To stop the Food Processor,pressthe OFF
Button. The indicator light will go out and
an automatic brake will stop the action
of the blade or disk within seconds.
3. Wait until the blade or disk comes to
a complete stop before removing the
work bowl cover. Be sure to turn off
the Food Processor before removing
the work bowl cover, or before
unplugging the Food Processor.
NOTE: If the Food Processorfails to
operate, make sure the work bowl and
cover are properly locked on the base,
and the large food pusher is inserted to
the maximum fill line on the feed tube
(see "Preparing the Food Processor for
Use" starting on page 8).
13
