Idiomas disponibles
Idiomas disponibles
2.
Preparing
the Food Processor for Use
Fit the disc over the metal pin on the
disc stem with the raised-blade side up.
The disc has a raised nub on the top
and grooves underneath to help align it
properly. Rotate the disc until it falls fully
onto the stem.
Fit the mini blade on the power shaft.
It may be necessaryto rotate the blade
until it falls into place. The mini bowl
can also be placed in the chef's bowl in
a similar manner.
Mini Bowl Assembly
l.
Place the mini bowl inside the work
bowl over the power shaft. Rotate the
mini bowl until it falls into place. When
properly seated in the work bowl, the
mini bowl cannot be rotated.
To remove the mini bowl after
processing, lift the bowl using the
two finger grips located along the top
edge of the bowl.
Chef's Bowl Assembly
Place the chef's bowl inside the work
bowl over the power shaft. Rotate the
chef's bowl until it falls into place. When
properly seated in the work bowl, the
chef's bowl cannot be rotated.
The chef's bowl can only be used with the
slicing, shredding, and cutting discs - the
multipurpose blade cannot be used. To
remove the chef's bowl after processing,
lift the bowl using the two finger grips
located along the top edge of the bowl.
lO
