Idiomas disponibles
Idiomas disponibles
All indicators
Battery overheated or
are off in
malfunctioned.
operation.
Battery
The hard floor cleaner is
indicator
in low battery.
turns red.
Dirty water tank is full.
The HEPA filter is dirty
or not installed.
The hard
The HEPA filter needs to
floor cleaner
be replaced.
is not picking
Debris channel is
up or suction
blocked.
power is
weak.
Battery may be
depleted.
Dirty water tank is not
installed properly.
HEPA filter is missing or
installed incorrectly.
HEPA filter is damaged
Dirty water
and needs to be
escapes from
replaced.
the cleaner.
Dirty water tank is full or
is installed incorrectly.
The hard floor
cleaner turns
Battery may be depleted.
off on its own.
TROUBLESHOOTING
- 24 -
Cool the hard floor cleaner down and
restart it.
Charge the hard floor cleaner as
instructed on page 12-14.
Empty the DWT.
Clean and dry the HEPA filter.
Follow filter cleaning instructions
on page 18.
To purchase parts call 1-877-531-
7321 (US) / 1-844-608-3081 (CA).
Clean the debris channel and DWT.
Charge the hard floor cleaner as
instructed on page 12-14.
Check the DWT for correct
installation and ensure it is
snapped firmly in place.
Check the filter for correct
installation. See page 18.
To purchase a replacement filter,
call 1-877-531-7321 (US) / 1-844-608-
3081 (CA).
Empty the DWT or position the
DWT correctly and snap firmly into
place.
Charge the hard floor cleaner as
instructed on page 12-14.
