Idiomas disponibles
Idiomas disponibles
Please pay special attention to these hazard alert boxes, and
follow any instructions given. WARNING statements alert you
to such hazards as fire, electric shock, burns and personal
injury. CAUTION statements alert you to such hazards as
personal injury and/or property damage.
Before assembling the hard floor wet/dry vacuum cleaner, check the
PACKING LIST (Page 2). Use this list to verify that you have received all
the components of your new Kenmore Hard Floor Wet/Dry Vacuum
Cleaner.
1. Insert the handle into the top
of the main body until you hear
a "click".
To remove: Press the hole
located on the back of the
main body with a tool (like a
screwdriver) and lift the handle
at the same time.
Click!
CHARGING AND BRUSH ROLLER AIR DRYING
WARNING
Before charging make sure the
hard floor cleaner is turned OFF.
Ensure the dirty water tank is
empty.
ASSEMBLY INSTRUCTIONS
Hole
2. Align the accessory holder
with the slot of the storage
base. Slide down the accessory
holder until it secures into
place. The brush roller and
cleaning tool can be stored in
the accessory holder.
1. Insert the charging adapter into
the charging port located on
the back of the storage base.
- 12 -
