Idiomas disponibles
Idiomas disponibles
Handles
If not installed, the handle is located in the interior of
the fresh food section.
Remove and discard handle packaging
and tape.
Fresh Food Handles
Standard
Front Mount Handle
Materials
Needed:
• Phillips screwdriver
• '/4" hex head driver
To install:
1. Remove '/4" hex head screws from
door face with hex head driver, and
Phillips screw from top of door.
• If reversing door, remove door
plugs from opposite side of door and insert in
screw holes.
2, Align handle holes with screw holes on
door face and secure with two door face
screws from step 1.
3. Locate handle trim in literature
pack
and install over top and bottom of
handle, as illustrated.
• Secure top handle trim with remaining
screw removed in step 1.
• Snap bottom trim over bottom portion
of handle.
To Remove:
1. Remove top handle trim by removing
top handle screw.
• Retain trim and screw for later
replacement.
2. Pry bottom handle trim from handle with
screwdriver
flat blade wrapped
in
masking tape.
• Retain trim for later replacement.
3. Remove two hex head screws.
• Retain screws for later replacement.
Freezer
Handle
Materials
Needed:
• Phillips screwdriver
To Install:
1. Install handle by fastening
with
screws removed from edge of door.
• If reversing freezer door, remove
door plugs from top edge of door
and insert into screw holes.
To Remove:
1. Remove handle screws with Phillips
screwdriver
and retain screws for
later use.
10
