Radio Settings - Pioneer AVH-Z9250BT Manual De Instrucciones

Radio settings

1
Press .
2
Touch then .
The system setting screen appears.
3
Touch [AV Source Settings].
4
Touch [Radio Settings].
The menu items vary according to the source.
Menu Item
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
AM: [Level1] [Level2]
[FM Step]*1
[100kHz] [50kHz]
[AM Step]*1
[9kHz] [10kHz]
[Regional]*2
[On] [Off]
[Alternative FREQ]*2
[On] [Off]
[Auto PI]*1
[On] [Off]
[TA Interrupt]*2
[On] [Off]
[News Interrupt]*2
[On] [Off]
Description
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
NOTE
The FM [Level4] (AM [Level2]) setting allows reception
of only stations with the strongest signals.
You can switch the seek tuning step for the FM
band, and the seek/manual tuning step for the
AM band.
NOTE
For the FM band, the manual tuning step is fixed to 50
kHz.
Switches whether the area code is checked
during the Auto PI search.
Allow the unit to retune to a different frequency
providing the same station.
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
NOTE
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
Interrupt the currently selected source with
news programmes.
*1 This setting is available when the source is turned off.
*2 This function is available only when you receive the FM band.
21
En