Idiomas disponibles
Idiomas disponibles
Closing the charging pedestal
1. Fit the panel on the two stud bolts in the lower
part of the pedestal.
2. Close the panel.
3. Lock the front panel with the key.
2
1
Fig. 11: Closing the charging pedestal
Bringing into operation /
Operation
Information
Have the electrical installations used for charging
checked regularly by a qualified electrician.
Cleaning
NOTE
3
Do not use highly abrasive, scratchy cleaning
materials, hard objects or steel wool.
Plexiglas:
▶ Clean the Plexiglas with water, liquid detergent
and a cloth.
Aluminium housing:
▶ Clean the aluminium housing with lukewarm
water (~25 °C) and a soft cloth. To remove coarse
dirt, use only pH-neutral soap. Allow this
to soften the dirt for a short time, then wipe off
with a cloth.
Bringing into operation / Operation
Spare parts
Plug holder with adapter set
Foundation fastening kit
Spare key
Information
To order another key, you will need the lock cylinder
number. This is stamped on the lock cylinder or
the key.
Technical data
Mechanical data
Dimensions of charging
190 (263) x 1670 x
pedestal
(width x height x depth)
Weight of charging pedestal
Environmental conditions
Operating temperature
Humidity
Altitude
971.044.031
971.044.032
DE
971.044.034
EN
ES
FR
IT
JP
150 mm
approx. 20.1 kg
KO
NL
-25 to +35 °C
5 – 95%
non-condensing
PTB
max. 4,000 m
above sea level
RU
ZH
ZHT
19
