Idiomas disponibles
Idiomas disponibles
COFFEE MAKER ENHANCED
FEATURES
The Pause and Pour feature enable you to
remove the carafe from the coffee maker
and pour a cup of coffee before brewing is
finished. When the carafe is removed, a
special valve stops the flow of coffee from
the brew basket. However, brewing does
not stop. If the carafe is not placed back in
the coffee maker within 25 seconds, water
and coffee will overflow the brew basket.
The coffee maker can be programmed
to
brew coffee at a preset time, making it easy
to wake up to fresh coffee every morning.
To program and activate the Automatic
Brew Timer:
1. Press the MODE button 3 times to enter
the "Auto Brew Timer" mode. The
"Auto" indicator will flash until this
programming
cycle is complete.
2. Press the PROGRAM/SET button. The
"Auto" indicator and hours digits will
flash. Press the "+" (plus) or "-" (minus)
button to set the hour.
3,
Press the PROGRAM/SET button. The
"Auto" indicator and minutes digits will
flash. Press the "+" (plus) or "-" (minus)
button to set the minutes.
4,
Press the PROGRAM/SET button. The
"Auto" and "AM/PM"
indicators will
flash. Press the "+" (plus) or "-" (minus)
button to select AM or PM.
5,
6,
Press and hold the PROGRAM/SET
button to program the Automatic
Brew
Timer setting. A short beep will sound
indicating programming
is complete.
Press and hold the BREW button. The
"Auto" indicator will turn on and the
coffee maker will begin brewing at the
programmed
time. The time that is set
will be displayed for 3 seconds as a
reminder of the set time. The
programmed time will remain active until
steps 1-5 are repeated or power is
interrupted for more than 60 seconds.
NOTE: To reactivate the programmed
time, press and hold the BREW button.
The "Auto" indicator will turn on and the
coffee maker will begin brewing at the
programmed
time.
The coffee maker can be programmed to
brew coffee at regular (REG) or bold (BOLD)
strengths.
NOTE: If you do not complete the
programming steps within 10 seconds, the
settings will be maintained and the coffee
maker will exit to the default mode.
To program and activate the Brew Strength:
1. Press the MODE button 2 times to enter
the "Brew Strength" mode. The "Brew
Strength" indicator will flash until this
programming cycle is complete.
2.
Press the PROGRAM/SET button. The
strength (REG or BOLD) indicator will
flash. Press the "+" (plus) or "-" (minus)
button to select the brew strength
desired (REG or BOLD). The
programmed strength will remain active
until steps 1-2 are repeated or power is
interrupted for more than 60 seconds.
3.
Press and hold the PROGRAM/SET
button to program the Brew Strength
setting. A short beep will sound,
indicating programming
is complete.
NOTE: If you do not hold the
PROGRAM/SET button until a short
beep is heard, the settings will be
maintained and the coffee maker will
exit to the default mode.
For glass carafe models only, the coffee
maker can be programmed
to keep coffee
warm for a specific length of time and
temperature. This feature is not available on
thermal carafe models.
NOTE: If you do not complete the
programming steps within 10 seconds, the
settings will be maintained and the coffee
maker will exit to the Default mode.
To program and activate the Warm Timer/
Temperature setting:
1. Press the MODE button 4 times to enter
the "Warm Timer / Temperature" mode.
The "Warm" indicator will flash until this
programming cycle is complete.
12
