Idiomas disponibles
Idiomas disponibles
Preparing
the Blender
for Use
Before
First
Use
Before using your Blender for the first time,
wipe Blender basewith a warm sudsy cloth,
then wipe clean with a damp cloth. Dry
with a soft cloth. Wash one-piece pitcher,
lid, and ingredient cap in warm, sudsy
water or just add soap and warm water to
the pitcher, place it on the Blender base,
and blend to clean (see Care and Cleaning,
page 9). Rinse parts and wipe dry.
Blender Assembly
1. Adjust the length of the power cord to
suit your needs.
A. If you will
be using
the Blender
witNn
two feet
(61 cm) of
an outlet,
you can
shorten
the power
cord
by coiling
it into
the storage
area on
the bottom
of the
base in the pattern
at dght
(indicated
by
arrows):
B. If you will
be using
the Blender
within
16 inches
(41 cm) of
an outlet,
you can
shorten
the power
cord
by coiling
it into
the storage
area on
the bottom
of the
base in tNs pattern:
C. To store the majodty
!i_
of the power
cord
under
the base of
your
Blender,
follow
cord
wrap
pattern
"B"
_,_:
above.
Then,
starting
at point
"A" in the
drawing
at dght,
coil
a second
layer of cord
into the
base in the
thepattern
arrows:indicated
by
_}:
2. Place the one-piece pitcher on the
Blender base.
3. Before plugging in the Blender, be sure
to press OFF to ensure the Blender is in
the Off mode.
Electrical
Shock Hazard
Plug into a grounded
3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these
instructions can result in death,
fire, or electrical
shock.
4. Plug into a grounded 3-prong outlet.
Blender is now ready for operation.
5. Before removing the pitcher from the
base after use, always press OFF and
unplug the power cord. Lift the pitcher
in a straight, upward motion off of the
Blender base.
