Idiomas disponibles
Idiomas disponibles
G Operating instruction
Controls and displays
1.
Display
2.
Time
3.
Radio symbol
4.
Alarm symbol 1
5.
Alarm symbol 2
6.
Date
7.
Day of the week
8.
Room temperature
9.
Room humidity
10. Projection arm
11. SNOOZE/LIGHT button = activate the backlight (approx. 8
seconds) / stop the alarm for 5 minutes
12. TIME button = set the Time mode
13. ALARM button = set the Alarm mode
14. UP button = increase the current set value / switch between
12 and 24-hour format
15. DOWN button = reduce the current set value (186381) /
switch between 12 and 24-hour format, C° / F°
16. WAVE button = activate/deactivate manual radio signal
reception
17. ON/OFF switch for alarm 1
18. ON/OFF switch for alarm 2
19. ROTATE button = rotate the projection by 0°, 90°, 180°
or 360°
20. Power supply unit connection socket
21. Battery compartment
22. USB charging port
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a dangerous
voltage of sufficient magnitude to constitute a risk of electric
shock.
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
• "Plus Charge" projection alarm clock
• Power supply unit
• These operating instructions
6
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters or
other heat sources or in direct sunlight.
• Keep this product, as all electrical products, out of the reach
of children!
• Do not operate the product outside the power limits given in
the specifications.
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Do not use the product in moist environments and avoid
splashes.
• Do not place the product near interference fields, metal frames,
computers, TVs, etc. Electronic devices and window frames can
negatively affect the product's functionality.
• Do not drop the product and do not expose it to any major
shocks.
• Do not modify the product in any way. Doing so voids the
warranty.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Use the item only in moderate climatic conditions.
• The product is intended for indoor use only.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable,
never on the cable itself.
Risk of electric shock
• Do not open the device or continue to operate it if it becomes
damaged.
• Do not use the product if the AC adapter, adapter cable or
power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave
any and all service work to qualified experts.
Warning – Batteries
• Replace all the batteries in a set at the same time.
• Do not mix old and new batteries, or batteries of different
types or from different manufacturers.
• Remove the batteries from products that are not being used
for an extended period (unless these are being kept ready for
an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not burn batteries or heat them up.
• Never open, damage or swallow batteries or allow
them to enter the environment. They can contain toxic,
environmentally harmful heavy metals.
