Idiomas disponibles
Idiomas disponibles
REFRIGERATOR SECTION
REFRIGERATOR SHELVES
The shelves in your refrigerator
are adjustable
to meet
your individual
storage needs. Your model may have glass
or wire shelves.
Adjusting
the shelves to fit items of difl:erent
heights will
make finding
the exact item you want easier. Doing so will
also reduce the amount of time the refrigerator
door is
open which will save energy.
IMPORTANT:
Do not clean glass shelves with warm water
while they are cold. Shelves may break if exposed to
sudden temperature
changes or impact.
NOTE: Glass shelves are heavy. Use special care when
removing them.
Adjusting Shelves
Remove shelves from the shipping
position and replace
shelves in the position you want.
To remove a shelf--TiltAup
the front of the shelf (_)
and lift it from below 2(,_). P ull the shelf out.
To reinstall a shelf_Tilt
the front of the shelf up and
guide the shelf hooks into the slots at a desired
height.
Then, lower the front of the shelf so that the hooks
drop into the slots.
Slide Out Shelves (optional
on some models)
Some of the refrigerator
shelves can be slid in and out of
the refrigerator
by carefully
pulling the front of the shelf
toward you or pushing the shelf in until it stops.
Folding Shelf (on some models)
You can store taller items, such as a gallon container
or bottles, by simply pushing the front half of the shelf
underneath
the back half of the shelf. Pull the front of the
shelf toward you to return to a full shelf.
®
CAUTION:
Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or food spilling.
21
