Idiomas disponibles
Idiomas disponibles
NOTE: Removing the doors is the recommended
procedure
when it is necessary to move the refrigerator
through a
narrow opening.
If it is necessary to remove the handles, follow the directions
below.
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE:
Handle appearance
may vary from the illustrations
on this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of the
handle with a 1/8 in. (3.1 mm) Allen wrench and remove
the handle.
NOTE: If the handle mounting
fasteners need to be
tightened
or removed, use a 1/4 in. (6.4 mm) Allen
wrench.
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE: Handle appearance
may vary from the illustrations
on this page.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the handle
footprints
over the mounting fasteners and tightening
the set screws with a 1/8 in. (3.1 mm) Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened
or removed, use a 1/4in. (6.4 mm) Allen
wrench.
12
