Idiomas disponibles
Idiomas disponibles
Troubleshooting
EN
The symbol
or ER03 will blink and a time-limited continuous signal will sound.
Food which has bailed aver, cookware or other items are causing the touch control sereor keys to be
consistently operated Remedy: clean the surface or remove the item. To delete the symbol press the
same key or switch the hob off and an on.
Error code E2 is indicated?
The electronic unit is too hat. Check the installation of the hob. Make sure that there is sufficient ventila-
tion. See the section on "Protection against overheating"
Do not heat-up empty pots and use appropriate cookware.
No indication, no function?
The hob has been incorrectly connected. Connect the appliance to the appropriate power supply.
An error code (ERxx or Ex) is indicated?
The appliance has developed a technical defect. Please call Customer Service.
Does the hob make noises (clicking or cracking noises) or can a buzzing sound be heard when the
hob is switched on?
This is design-specific and has no influence on quality and operation.
Does the cooling fan still operate after it has been switched off?
This is normal since the electronic unit is being cooled down.
Is the cookware you are using making noises?
This is due to technical reasons; the induction hob and the pot are not at risk.
Consider the hints in case some disturbing noises appear:
• Put the cookware centrically on to the respective cooking zone.
• Try to shift the cookware a little bit onto the cooking zone.
• When using 2 cooking zones in bridge mode, put the cookware centrically on both cooking zones (ie. the
coverage of both cooking zones should be equal).
• Ensure that there are no foreign bodies between the glass ceramic and the cookware's bottom (e. g. salt
grains)
• Ensure that a lid on top of the cookware is not able to vibrate
• Try other cookware. Especially pots made of a compound material may cause noises.
• Avoid that 2 or more pots are touching each other.
• Use cookware with flat bottom to avoid movement of the cookware.
59
