Idiomas disponibles
Idiomas disponibles
EN
4 Consumables and
accessories
4.1 Blade and cut guide selection
The blades have 2 cutting edges. These
cannot be reground.
Depending on the thickness or density of the
workpiece, different types of blades are
needed.
With improper blade selection, the following
may happen:
– The cut quality is greatly impaired.
– The feed force increases significantly.
– The blade breaks.
– The chip deforms unfavorably.
For gentle work and good cutting perfor-
mance, make sure that the blades and cut
guides are sharp, and that they are changed
promptly.
When cutting radii, the following must be
heeded:
– Do not twist the machine.
– Work only at a low feed rate.
For notes about the selection of the correct
tool, order specifications for wearing parts
and consumables, and accessories and
spare parts lists, see:
www.trumpf.com
C 160
C 160
(2A5)
(2B5)
C 200
(2A5)
C 250
C 250
(2B1)
(3B5)
16
Translation of the original operator's manual
4.2 Alternative rechargeable
batteries
C 160
C 160
(2A5)
(2B5)
These power tools can be
used with all CAS LIHD 12 V and CAS LI-Ion
12 V rechargeable batteries.
C 200
C 250
(2A5)
(3B5)
These power tools can be
used with all CAS LIHD 18 V and CAS LI-Ion
18 V rechargeable batteries up to a capacity
of 8 Ah.
