Idiomas disponibles
Idiomas disponibles
˜ Cleaning and care
m
WARNING!
Switch off the product and disconnect
it from the mains before performing
inspection, maintenance and cleaning
work!
˜ Cleaning
NOTE
Clean the product after each use, otherwise
u
the nozzles
may clog up.
[
1 ]
Do not use chemical, alkaline, abrasive or
u
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces.
Do not use silicone-based lubricants.
u
Never place the entire product in solvent.
u
Wear suitable gloves when cleaning.
u
Never allow fluids to get into the product.
Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
Clean the motor unit
soft brush for areas that are hard to reach.
In particular clean the air vents after every use
with a cloth and soft brush.
The vents must always be clear.
with a dry cloth. Use a
[
]
Spray water with the product after each use.
Clean the following parts with the cleaning
brush
or the cleaning needle
[
]
–
Nozzles
[
1 ]
–
Needle (openings in the area around
2 ]
[
the needle)
–
Spray unit
4 ]
[
–
Nozzle head
[
]
˜ Cleaning the air filter
Fig. F
Remove the air filter
release buttons
[
]
Remove the air filter cover.
Remove the air filter
cover
.
[
]
If necessary, shake out the air filter
In case of more severe dirt accumulation, clean
the air filter
under running water. Let the air
[
]
filter dry thoroughly.
If necessary, replace the air filter
replacement air filter
˜ Maintenance
The product is maintenance-free.
Before and after each use, check the product
for wear and damage.
˜ Repair
This product does not contain any parts
that can be repaired by the user. Contact
an authorised service centre or a similarly
qualified person to have it checked and
repaired.
:
[
]
: Press and hold the
[
]
on the air filter cover
[
from the air filter
[
]
.
[
]
with the
[
]
.
[
]
GB/MT
.
]
65
