Idiomas disponibles
Idiomas disponibles
Keep cutting tools sharp and
6)
clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and
are easier to control.
7) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
8) Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Service
Have your power tool serviced by
1)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
60 GB/MT
˜ Additional safety instructions
for paint spray guns
Keep your work area clean, well lit
and free of paint and solvents, cloths
and other inflammable materials.
Possible risk of spontaneous combustion. Have
a fully functioning fire extinguisher available at
all times.
Ensure adequate ventilation in the
spray zone and sufficient fresh air in
the entire room. Evaporation of flammable
solvents will cause an explosive environment.
The product is only suitable for use
with non-inflammable materials.
Use materials based on water, non-
volatile hydrocarbons or similar
materials. The evaporation of volatile
solvents will cause an explosive environment.
Do not spray near ignition sources
such as static electric sparks, open
flames, ignition flames, hot items,
motors, cigarettes or sparks caused
by plugging in/unplugging power
cables or by operating switches.
These ignition sources could ignite a fire in the
environment.
Do not spray any material if you do
not know whether it is potentially
dangerous. Unknown materials can cause
hazardous conditions.
