Hitachi HC-A8MB Manual De Instalación Y Funcionamiento página 45

FUNCIONAMIENTO
Offset Descripción
192 YCC - Required Units
?
N O T E
• Register address is calculated as: 5000+(Modbus_Id*200)+offset
• Modbus_Id as configured by configuration software
• For VRF / Package units, only the relevant data are available (heating units registers will not give any value). The situation is the same for heating
units (registers related to air/air units will not give any value).
• Availability:
- PAC: VRF and package units.
RAC: Domestic units connected to the H-link via PSC-6RAD or SPX-RAMHLK
-
- ATW: Air to water units.
• (1) Take into account only if it is different from zero.
• (2) Bit 0 (ON/OFF) and Bit 4 (Louver) selectable only when all centrals are actived.
• In order to full lock setting from RCS (Central shown in RCS) set this register to 31
39 PMML0351A rev.4 - 04/2020
Valores Lectura/escritura
0~8 Lectura
Disponibilidad
VRF Adaptador ATW
O