ΛΕΙΤΟΥΡΓΊΑ
Offset
Περιγραφή
192
YCC - Required Units
?
N O T E
•
Register address is calculated as: 5000+(Modbus_Id*200)+offset
•
Modbus_Id as configured by configuration software
•
For VRF / Package units, only the relevant data are available (heating units registers will not give any value). The situation is the same for heating
units (registers related to air/air units will not give any value).
• Availability:
-
PAC: VRF and package units.
RAC: Domestic units connected to the H-link via PSC-6RAD or SPX-RAMHLK
-
-
ATW: Air to water units.
• (1) Take into account only if it is different from zero.
•
(2) Bit 0 (ON/OFF) and Bit 4 (Louver) selectable only when all centrals are actived.
•
In order to full lock setting from RCS (Central shown in RCS) set this register to 31
215
PMML0351A rev.4 - 04/2020
Τιμές
Read/Write
0~8
Read
Availability
VRF
RAC
ATW
O