Mx Onda MX-PIP2199 Manual De Instrucciones página 85

RIGHT COOKING ZONE (1500 W max.)
Function selector
By the function selector you can choose the mode of working in power (500 W
to 1500 W) at temperature (60 °C to 240 °C) or set the timer.
To select the operating mode in power or temperature follow the steps below to
adjust the timer, see the following section.
Power operating mode
1. With the power plate and a container in the right cooking, tap once with
fingertip touch button 12 ( ) display 13 shows the power level default and
the LED power mode 16 will light.
2. Touch with your fingertip on the touch button 14 ( ) or 15 ( ) to increase
or decrease power respectively. The display 13 will show the selected
power.
3. Touch with fingertip touch knob 19 (MAX) or 20 (MIN) to directly select the
maximum or minimum power of the plate.
4. At any time during cooking you can increase or decrease the power switch
to temperature or set the timer.
Temperature operating mode
1. With the power plate and a container in the cooking area, tap three times
with fingertip touch button 12 ( ) display 13 shows the temperature level
default and the LED mode indicator temperature 17 will light.
2. Touch with your fingertip on the touch button 14 ( ) or 15 ( ) to increase
or decrease the temperature respectively. The display 13 will show the
selected temperature.
3. Touch with fingertip touch knob 19 (MAX) or 20 (MIN) to directly select the
maximum or minimum temperature of the plate.
4. At any time during cooking you can increase or decrease the temperature,
changing the power mode or set the timer.
Timer
The timer allows you to set a time for automatic shutdown, this time can vary
between 5 and 180 minutes. For the timer setting you must first select an
operating mode (power or temperature) and a power level or temperature
respectively.
For the timer setting, follow these steps:
1. With the power plate and a container in the right cooking zone, select an
operating mode and a power level or temperature.
2. Momentarily touch with fingertip touch button 12 ( ), the display will show
" 0 " and the LED flashing timer 18 mode.
11