Turn On And Off - Mx Onda MX-PIP2199 Manual De Instrucciones

Right cooking zone
12. Touch button function selector
13. LED screen
14. Touch up button
15. Touch down button
16. LED power mode selected
17. LED temperature indicator of the selected mode
18. LED indicator activated timer mode
19. Touch Jump button at maximum power or temperature
20. Touch Jump button at minimum power or temperature

TURN ON AND OFF

1. Place one or two containers on the cooking zones.
2. To turn the plate, touch and hold the contact with fingertip for two seconds
the touch button 1 (
sound a "beep".
3. By the function selector 3 or 12 ( ) select the desired mode for the
cooking area left or right respectively
4. To turn off the plate again play with fingertip touch button 1 (
indicator 2 off and the buzzer will sound a "beep".
Note:
If you turn on the plate and do not select any function, automatically turns off
after about 10 seconds.
LEFT COOKING ZONE (2000 W máx.)
Function selector
By the function selector you can choose the mode of working in power (500 W
to 2000 W) at temperature (60 °C to 240 °C) or set the timer.
To select the operating mode in power or temperature follow the steps below to
adjust the timer, see the following section.
Power operating mode
1. With the power plate and a container in the left cooking, tap once with
fingertip touch button 3 ( ) display 4 shows the power level default and the
LED power mode 7 will light.
2. Touch with your fingertip on the touch button 5 ( ) or 6 ( ) to increase or
decrease power respectively. The display 4 will show the selected power.
3. Touch with fingertip touch knob 10 (MAX) or 11 (MIN) to directly select the
maximum or minimum power of the plate.
4. At any time during cooking you can increase or decrease the power switch
to temperature or set the timer.
), the LED power indicator light 2 and the buzzer will
9
) LED power