Idiomas disponibles
Idiomas disponibles
Mounting
Observe the following mounting
instructions:
Vibrations can disturb the function
„
of the suction and discharge valves.
Fasten the dosing pump so that no
vibrations can occur.
If the valves are not vertically
„
upwards, they cannot close pro-
perly. The pump must be aligned
vertically.
Mount Pump
To attach the pump to the substrate,
screw the pump to the mounting holes
provided on both sides using a screw
with a diameter < 4.5 mm.
EN
8
≥10 mm
2 m*
* available in other versions and lengths
≥10 cm
100 – 230 V ±10 %
50/60 Hz
