Idiomas disponibles
Idiomas disponibles
Introduction..................................................................... 5
Safety..............................................................................6
Assembly...................................................................... 10
Operation...................................................................... 12
Maintenance................................................................. 14
Troubleshooting............................................................ 17
Product description
This product is a grass trimmer/brushcutter with a
combustion engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Intended use
The product can be used with a grass blade or a trimmer
head to cut different types of vegetation. Do not use
Product overview
(Fig. 1)
1. Grease filler cap, bevel gear
2. Bevel gear
3. Cutting attachment guard
4. Shaft
5. Handlebar
6. Start throttle button
7. Stop switch
8. Throttle trigger
9. Throttle trigger lockout
10. Handlebar clamp
11. Suspension ring
12. Clutch cover
13. Spark plug cap and spark plug
14. Air purge bulb
15. Fuel tank
16. Muffler cover
17. Cylinder cover
18. Air filter cover
19. Choke control
20. Starter rope handle
21. Locking pin
22. Hex key
23. Wrench
24. Socket wrench
25. Trimmer head
26. Operator's manual
27. Drive disc
1544 - 005 - 03.04.2023
Contents
Transportation and storage...........................................18
Technical data.............................................................. 18
Accessories.................................................................. 19
EC Declaration of Conformity....................................... 20
Appendix ......................................................................93
Introduction
the product for other tasks than grass trimming and
grass clearing. Use a grass blade or trimmer head to
cut grass.
Note:
National or local regulations may regulate the
use. Comply to given regulations.
28. Harness
29. Locknut
30. Support cup
31. Support flange
32. Transport guard
33. 2-teeth blade
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
WARNING! This product is dangerous.
Injury or death can occur to the operator
or bystanders if the product is not used
carefully and correctly. To prevent injury
to the operator or bystanders, read
and obey all safety instructions in the
operator's manual.
Please read the operator's manual
carefully and make sure that you
understand the instructions before use.
This product complies with applicable EC
Directives.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
5
