Line Laser
Dimensions (length × width × height) 154 × 24 × 30 mm
A) The working range may be reduced by unfavourable environ-
mental conditions (e.g. direct sunlight).
B) when the measuring tool is positioned correctly(see "Position-
ing the Measuring Tool (see figure B)", page 29).
C) At 20–25 °C
D) The values stated presuppose normal to favourable environ-
mental conditions (e.g. no vibration, no fog, no smoke, no dir-
ect sunlight). Extreme fluctuations in temperature can cause
deviations in accuracy.
E) Only non-conductive deposits occur, whereby occasional
temporary conductivity caused by condensation is expected.
The serial number (8) on the type plate is used to clearly identify
your measuring tool.
Assembly
Inserting/Replacing Batteries (see figure A)
It is recommended that you use alkaline manganese batter-
ies to operate the measuring tool.
To open the battery compartment cover (10), push it away
from the battery compartment in the direction of the ar-
row. Insert the batteries.
When inserting the batteries, ensure that the polarity is
correct according to the illustration on the inside of the
battery compartment.
Always replace all the batteries at the same time. Only use
batteries from the same manufacturer and which have the
same capacity.
Take the batteries out of the measuring tool when
u
you are not using it for a prolonged period of time.
The batteries can corrode and self-discharge during
prolonged storage in the measuring tool.
Bosch Power Tools
English | 27
EasyLevel
1 609 92A 8KK | (24.02.2023)