Oase ProfiClear Premium Fleece Serie Instrucciones De Uso página 61

E2: Time interval for Er22 "Time interval Er22"
Within the pre-set time interval the automatic feed for the filter fleece must start once. Otherwise
the system message Er22 is displayed.
 The lower the water contamination is, the less frequently the automatic feed starts.
 Increase the value if the system message Er22 appears frequently.
Proceed as follows
1.
Press the button several times until the
display shows BR.
2.
Press the button
the pre-set value is shown on the display.
3.
Press the button several times to change
the value.
To change the value quickly: Press and hold

the button.
E3: Status display, filter fleece on the control system
In the "OASE Control" app you can adjust the specifications for the filter fleece (length, minimum du-
ration of use). These specifications are monitored using the system messages Er23 and In23.
(→ System messages)
 Monitoring with the system messages Er23 and In23 is only possible when using the "OASE Con-
trol" app.
 Deactivate the function (E3 = 0) if you are no longer using the OASE app. Otherwise the system
messages Er23 and In23 will be permanently displayed on the control system.
Proceed as follows
1.
Press the button several times until the
display shows E3.
2.
Press the button
the pre-set value is shown on the display.
3.
Press the button to change the value.
Loading default settings
Proceed as follows
Press the buttons and
them for 10 s until the display shows rE.
Information
To cancel and exit the menu: Either wait for 10 s or press

or
and hold it for 5 s until To cancel and exit the menu: Either wait for 5 s or press

or
 Adjustable range: 01 ... 48 (1 ... 48 h)
 Increment: 1 (1 h)
Factory setting: 03 (3 h)

The number can only be changed upwards. Once the value 48 is

reached, the display returns to 01.
Saving the set value: Wait for 5 s until the menu is automati-

cally exited.
Cancel without saving and exit the menu: Press

Information
To cancel and exit the menu: Either wait for 10 s or press

or
and hold it for 5 s until To cancel and exit the menu: Either wait for 5 s or press

or
Adjustable range: 0: Function deactivated, 1: Function activated

Factory setting: 0 (function deactivated)

 Saving the set value: Wait for 5 s until the menu is automati-
cally exited.
Cancel without saving and exit the menu: Press

Information
All individually set values are overwritten!
and hold
The following values are set:
Filter fleece feed time FF: 0.1 s

Break time br: 10 s

Time interval E2: 3 h

Status display filter fleece on the control system E3: 0

.
.
.
.
EN
or .
or .
61