Idiomas disponibles
Idiomas disponibles
XP MZ-33 /22 01ENG
09-05-2000 09:32
Using the Sound Control
You can also adjust the sound settings exclusively on the
set:
1 Press SOUND CONTROL once or more to select the
various options:
• once:
display shows DBB OFF;
if DBB is activated, display shows DBB ON and
,
DBB
• twice:
display shows DSC status OPTIMAL.
(display shows JAZZ, POP, or CLASSIC and the
respective
,
or
symbol if selected)
• three times:
display shows Incredible Surround (IS) status
IS OFF.
if IS is activated, display shows IS ON and
.
2 For each sound setting, turn the VOLUME control in any
direction to select ON, OFF or DSC options.
3 Press SOUND CONTROL again to confirm.
• Display shows the next sound setting to the adjusted.
• After the IS setting is confirmed,the display shows
the volume level VOL briefly, before returning to the
current playback display.
Demo mode
• In standby, press 9 on the set for more than 5 seconds.
™ Demo messages scroll continously across the display.
• Repeat step to deactivate.
™ DEMO OFF scrolls across the display.
Pagina 7
MZ-33 / 22 page 7
CLOCK
MC 158 COMP
MC 158 COMP
IO
IO
ACT AUDIO
ACT AUDIO
IO
IO
SYST EM
SYST EM
IO
IO
II
II
IO
IO
II
II
IO
IO
IO
IO
II
II
IO
IO
I II
I II
Setting the clock
There are two possible methods for setting the clock:
manually or automatically by using RDS.
Automatic clock setting (RDS versions only)
1 Tune to a RDS station (see TUNER).
2 Press RDS/ CLOCK for 2 seconds or more.
™ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then displayed.
™ NO RDS TIME is displayed if no time signal has
been received and you will have to set the clock
manually.
Manual clocksetting
1 In standby, press CLOCK.
™ The clock digits for the hours flash 0:00.
2 Turn VOLUME to set the hours: clockwise for hours up;
anti-clockwise for hours down.
3 Press CLOCK again.
™ The clock digits for the minutes flash 0:00.
4 Turn VOLUME to set the minutes: clockwise for minutes
up; anti-clockwise for minutes down.
5 Press CLOCK to confirm the time.
TIMER
MC 158 COM
MC 158 COM
PAC T AUD IO
PAC T AUD
IO SYS TEM
SYS TEM
OPEN
OPEN
CLOSE
CLOSE
PRESET
PRESET
TUNING
TUNING
Setting TIMER
• The unit can be used as an alarm clock, whereby the set
is switched on at a set time. The clock time needs to be
set first before the timer can be used.
• During setting, if more than 90 seconds elapses without
a button being pressed the unit quits the timer setting
mode.
1 Press PROGRAM on the set for 2 seconds or more in
standby mode.
™ Display shows TUNER or CD and N flashes
™ Display shows SET CLOCK TIME if the clock has
not been set
2 Turn VOLUME clockwise.
™ Display sequence shows CD, TUNER, CD...
3 Press PROGRAM (on the set) to confirm source.
™ Display shows ON 0:00, the clock digits for the
hours; 0:00 flash.
4 Turn VOLUME to set the hours: clockwise for hours up;
anti-clockwise for hours down.
OPEN
OPEN
CLOSE
CLOSE
PRESET
PRESET
7
