Cleaning The Extraction Channels; Accessories, Tools - Festool LEX 2 150/3 Manual De Instrucciones

Maintenance and care
Always disconnect the tool from
the compressed air supply before doing any
work on the tool.
Any maintenance or repair work requiring the
motor housing to be opened may only be carried
out by an authorized service workshop.
Vanes
We recommend that the vanes on the motor
be replaced after approx. 500 operating hours.
Sanding pad brake
The collar (5.1) makes contact with the sanding
pad, thus preventing uncontrolled vibration of
the sanding pad. This collar wears out over time
and must be replaced should brake fading occur.
The sanding pad must be removed for this. You
can then remove the collar from the snap-on
fastener (5.2) and replace it with a new one.
Lubrication
If the tool has not been used for an extended
period, such as a weekend, introduce 1 or 2
drops of lubricating oil into the compressed-air
supply (5.3) on the tool prior to use.
Replacing the silencer
The silencer on the IAS 2 connecting piece must
be replaced at regular intervals to maintain the
power of the pneumatic tool.

Cleaning the extraction channels

We recommend that the extraction channels in
the tool (5.4) be cleaned once a week using a
small pipe-cleaner brush or a cloth (especially
when sanding resin filler).

Accessories, tools

For safety reasons, only use
original Festool accessories and tools!
Accessory and tool order numbers can be found
in your Festool catalog.
Warranty
Conditions of 1+2 Warranty
You are entitled to a free extended warranty (1
year + 2 years = 3 years) for your Festool power
tool. Festool shall be responsible for all shipping
costs during the first year of the warranty. During
the second and third year of the warranty the
customer is responsible for shipping the tool to
Festool. Festool will pay for return shipping to
the customer using UPS Ground Service. All
warranty service is valid 3 years from the date
of purchase on your receipt or invoice.
Festool Limited Warranty
This warranty is valid on the pre-condition that
the tool is used and operated in compliance with
these Festool operating instructions. Festool
warrants, only to the original consumer
purchaser, that the specified tool will be free from
defects in materials and workmanship for a term
of one year from the date of procurement. Festool
makes no other warranty, express or implied,
for Festool portable power tools. No agent,
representative, distributor, dealer or employee
of Festool has the authority to increase or
otherwise change the obligations or limitations
of this warranty. The obligations of Festool in its
sole discretion under this warranty shall be
limited to the repair or replacement of any Festool
portable power tool that is found to be defective
as packaged with this User Manual.
Excluded from coverage under this warranty are:
normal wear and tear; damages caused by
misuse, abuse or neglect; damage caused by
anything other than defects in material and
workmanship. This warranty does not apply to
5