Idiomas disponibles
Idiomas disponibles
1 SAFETY PRECAUTIONS
1
SAFETY PRECAUTIONS
MEANING OF SYMBOLS
As used throughout this manual: Means Attention! Be Alert!
DANGER!
Means immediate hazards that, if not avoided, will result in immediate,
serious personal injury or loss of life.
WARNING!
Means potential hazards which could result in personal injury or loss of
life.
CAUTION!
Means hazards which could result in minor personal injury.
WARNING!
Read and understand the instruction manual before
installing or operating.
NOTE!
Be sure this information reaches the operator. You can obtain extra copies via
your supplier.
CAUTION!
These INSTRUCTIONS are for experienced operators. If you are not fully familiar
with the principles of operation and safe practices for arc welding equipment, we
urge you to read our booklet, "Precautions and Safe Practices for Arc, Cutting
and Gouging", Form 52-529 . Do NOT permit untrained persons to install,
operate, or maintain this equipment. Do NOT attempt to install or operate this
equipment until you have read and fully understand these instructions. If you do
not fully understand these instructions, contact your supplier for further
information. Be sure to read the Safety Precautions before installing or operating
this equipment.
This equipment will perform in conformity with the description thereof contained in this
manual and accompanying labels and/or insert when installed, operated, maintained and
repaired in accordance with the instruction provided. This equipment must be checked
periodically. Malfunctioning or poorly maintained equipment should not be used. Parts that
are broken, missing, worn, distorted or contaminated should be replaced immediately. Should
such repair or replacement become necessary, the manufacturer recommends that a
telephone or written request for service advice be made to the Authorised Distributor from
whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of
the manufacturer. The user of this equipment shall have the sole responsibility for any
malfunction which results from improper use, faulty maintenance, damage, improper repair or
alteration by anyone other than the manufacturer or a service facility designated by the
manufacturer.
0558 012 084
- 4 -
© ESAB AB 2015
