Aiwa NSX-AV800 Manual De Instrucciones página 7

Ocultar thumbs Ver también para NSX-AV800:
Idiomas disponibles

Idiomas disponibles

SETTING THECLOCK
SIMPLE AUDIO ADJUSTMENT
-- CLOCK
1,3,5-
II-
2,4
When
the AC cord is connected
for the first time, the II SET
button flashes.
Set the time
as follows
while
the power
is off°
1 Press the II SET button.
The hour flashes.
PHONES --
--BBE
--
T-BASS
VOLUME
--
BALANCE
VOLUME
CONTROL
Turn the VOLUME
control on the main unit, or press the VOLUME
buttons
on the remote control.
To change the left/right
balance
Turn the BALANCE control,
2 Press
the I_I<1 DOWN
or _1_1 UP button
to
designate the hour.
3 Press the II SET button to set the hour,
The hour
stops flashing
and the minutestarts
flashing.
4 Press
the I<<
DOWN
or I_IH UP button
to
designate the minute.
5 Press the II SET button to set the minute and
complete setting,
The minutestops flashing on the display and the clock starts
from 00 second.
To correct
the current
time
Press the POWER
button to turn the unit off. Press the II SET
button
and carry out steps 1 to 5 above.
To display
the current
time
Press the CLOCK
button
on the remote
control.
The clock is
displayed
for 4 seconds.
However,
the time cannot
be displayed
during
recording.
To switch
to the 24-hour
standard
Press the CLOCK
button on the remote control and then press
the II button within 4 seconds.
Repeat
the same procedure
to restore the 12-hour
standard.
If the clock
display
flashes
while
the power
is off
This is caused
by a power
interruption.
The current time needs
to be reset.
If power is interrupted
for more than approximately
24 hours, all
settings
stored
in memory
after purchase
need to be reset.
BBE SYSTEM
The BBE system enhances
the clarity
of high-frequency
sound.
It also enriches
the KARAOKE
function
to make your voice sound
clear and pleasant.
Press
the BBE button.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position to suit your preference.
(cancel)
SUPER
T-BASS SYSTEM
The T-BASS
system
enhances
the realism
of low-frequency
sound.
Press the T-BASS
button.
Each time it is pressed,
the ievel changes.
Select
one of the
three levels, or the off position
to suit your preference.
Low frequency
sound may be distorted
when the T-BASS
system
is used for a disc or tape in which low frequency
sound is originally
emphasized.
In this case, cancel the T-BASS
system.
ENGLISH
6
loading