Idiomas disponibles
Idiomas disponibles
PROGRAMMED E DITRECORDING
© c
\
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed,
6 Repeat step 5 for the rest of the tracks
for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Remaining time
of side A
Total number
Programmed
of programmed
tracks
tracks
7 Press the EDIT/CHECK
button
to select
side
B
and program
the tracks
for side B.
After confirming B on the display, repeat step 5.
Tape side B (reverse side)
!
The programmed
edit recording
will not start from a point halfway
in the tape. The tape must be recorded
from the beginning
of
either side.
Use the remote control from steps 3 to 8.
1 Insert
the tape into deck 2, and press
the DOLBY
NR button
te turn
Dolby
NR on or off.
Insert the tape with the side to be recorded on first facing out
from the unit,
2 Press the CD button and load the disc(s).
3 Press the EDIT/CHECK
button
twice.
"EDIT" lights up and "PRGM" flashes on the display.
Press the O/O REC/REC MUTE button and then
press the <11_ button within 2 seconds to start
recording.
The tape
is rewound
to the beginning
of the front side, the
lead segment
is played through for 10 seconds,
and recording
starts.
When recording
on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press the • button, Recording and CD play stop simultaneously•
To check
the order
of the programmed
track numbers
Before
recording,
press the EDIT/CHECK
button
to select side
A or B, and press the 44
or I_1_
button repeatedly,
Program
number
4 Press the numeric buttons to designate the tape
length,
10 to 99 minutes
can be specified.
Example:
When
using a 60-minute
tape,
press the 6 and 0
buttons.
Maximum
recording
Tape length
time for side A
Track number
Programmed
track numbers
To change
the program
of each
side
Press the EDIT/CHECK
button to select side A or B, and press
the •
CLEAR
button to clear the program
of the selected
side.
Then program
tracks again.
To clear the edit program
Press the • button twice so that"EDIT" disappears on the display,
Tape side A (front side)
5 Press
one of the DISC
DIRECT
PLAY
buttons
to
select
a disc and press
the numeric
buttons
to
program
a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2 and the numeric buttons +10 and 0.
Recording
is inhibited
if the erasure prevention
tab on either side
of the tape is broken
oft.
ENG'IS. 1 6
