Idiomas disponibles
Idiomas disponibles
PRESET
NUMBER
TUNING
BASIC OPERATIONS
/
Use the remote control to select the preset number directly.
1 Press
the TUNER/BAND
button
to select a band.
2 Press
the numeric
buttons
to select
a preset
number,
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Selecting
a preset
number
on the main
unit
Press the TUNER/BAND
button to select
a band. Then, press
the <I I_ DIRECTION/PRESET
button
repeatedly.
Each time the button
is pressed,
the next highest
number
is
selected.
About
cassette
tapes
• To prevent
accidental
erasure,
break off the plastic tabs
en the cassette
tape after recording
with a screwdriver
or
other pointed tool.
Side A _
Type II tape ---_
Tab for side A
detection
_.._..,,_
slot
//-
To record on the tape again, cover the tab openings
with
adhesive
tape,
etc. (On Type tl tapes,
take care
not to
cover the Type fI tape detection
slot.)
• 120-minute
or longer
tapes are extremely
thin and easily
deformed
or damaged.
They are not recommended.
• Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
DOLBY
NR system
The Dolby Noise Reduction
system
reduces tape hiss noise,
For
optimum
performance
when
playing
back
a tape
recorded
with the DOLBY
NR system,
turn on the DOLBY
NR system.
9 ENGLISH
TAPE/
DECK 1/2
REV MODE_
Deck 1
...................
,___
Deck 2
INSERTING
TAPES
• On deck 1, tapes are always
played
back on both sides.
On deck 2, you can select a reverse
mode to play back one or
both sides.
• Use Type ! (normal),
Type I1 (high/CrO2)
or Type ]IV (metal)
tapes for playback.
Press theTAPE button and press the _ EJECT mark
to open the cassette holder.
A
Insert
a tape
with the exposed
side down.
Push the cassette
holder
to close.
To select a reverse mode (deck 2 only)
Each time the REV MODE button is pressed, the reverse mode
changes.
L> _ _> .T_) - > (__.)J
To play one side only, turn on _..
To play from front side to back side once only, turn on .'T).
To play both sides repeatedly,
turn on (_-L').
• When
tapes
are loaded
in both
decks,
.T_.) in the display
indicates
Continuous
Play.
