Aiwa NSX-AV800 Manual De Instrucciones página 6

Ocultar thumbs Ver también para NSX-AV800:
Idiomas disponibles

Idiomas disponibles

CONNECTING
AN OUTDOOR
ANTENNA
For
better
FM
reception,
use
of an outdoor
antenna
is
recommended.
Connect
the outdoor
antenna
to the FM 75 _ terminals.
To connect other optional equipment
_ page 22.
REMOTE
CONTROL
Inserting
batteries
Detach
the battery
cover on the rear of the remote control
and
insert two R6 (size AA) batteries.
R6(AA)
When
to replace
the batteries
The maximum
operational distance between
the remote control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace the batteries
with new ones.
• If the unit is not going to be used for an extended
period
of
time,
remove
the batteries
to prevent
possible
electrolyte
leakage.
• The remote control
may not operate
correctly
when:
- The line of sight between
the remote control
and the remote
sensor
inside the display window
is exposed
to intense
light,
such as direct sunlight
- Other
remote controls
are used nearby
(television,
etc.)
BEFORE OPERATION
DEMO
POWER
......
CD
To turn the unit on
Press one of the function buttons
(TAPE, TUNER,
VIDEO/AUX,
CD).
Playback
of the inserted disc or tape begins,
or the previously
tuned station
is received
(Direct
Play Function).
The POWER
button is also available.
The disc compartment
may open and close to reset the unit.
DEMO
(Demonstration)
mode
When
the AC cord
is connected
for the first time, the display
window demonstrates
the functions
of the unit. When the power
is turned on, the DEMO display
is overridden
by the operation
display.
When
the power
is turned
off, the DEMO
mode
is
restored.
To cancel DEMO mode
Press the DEMO button. To reenter, press again,
Illumination
guides
Whenever
the AC cord is connected
or one of the function
buttons
is pressed,
the buttons for that operation
light up or flash.
Example:
When the AC cord is connected,
the ||
SET button
flashes
as a guide to setting
the current
time.
Flash
windows
The windows
on the top of the unit and the cassette
decks light
up or flash while the unit is being powered
on.
To turn off the light of the top window,
press the •
button while
pressing
the CD button. To turn back on, repeat the above.
To turn off the light of the cassette
decks,
press the •
button
while
pressing
the TAPE button.
To turn back on, repeat
the
above.
After
use
Press the POWER
button
to turn off the power.
The display
changes
to the clock.
5
ENGLISH
loading