Idiomas disponibles
Idiomas disponibles
BASIC RECORDING
This section explains
how to record from the tuner, CD player, or
external
equipment.
4
©@O
Preparation
• Set the tape to the point where recording will start.
• Use Type [ (normal) and Type tl (high/CrO2) tapes for recording,
1 Insert the tape to be recorded
on into deck 2.
Insert the tape with the side to be recorded on first facing
out from the unit and the exposed side down,
To stop recording, press the • button.
To pause recording, press the II button. (Applicable when the
source is TUNER, VIDEO/AUX.)
To resume recording, press
again.
To start
recording
with the remote
control
First press the 0/0
REC/REC
MUTE
button,
and then press
the <lllb
button within 2 seconds.
INSERTING
BLANK SPACES
Insertion
of 4-second
blank spaces
enables
activation
of the
Music Sensor
function.
(Applicable
when the source
is TUNER
or VIDEO/AUX.)
1
Press the •
REC/REC
MUTE button
during recording
or
while
in recording
pause
mode,
on the display
flashes
for 4 seconds
and the tape runs
without
recording.
After
4 seconds,
the deck enters
the
recording
pause mode.
2
Press the II button to resume
recording.
To insert a blank space of less than 4 seconds,
press the •
RECiREC
MUTE button again while _
is flashing,
To insert
blank
spaces
of more
than
4 seconds,
after the
deck enters recording
pause mode, press the •
REC/REC
MUTE
button again.
Each time the button is pressed,
a 4-second
blank
space is added.
2 Press the REV MODE button to select the reverse
mode,
To record on one side only, turn on _.
To record on both sides, turn on _.) or (_-).
3 Press the DOLBY NR button to turn Dolby NR on
or off.
To record with DOLBY
NR, turn on 13[] NR.
To record without
DOLBY NR, turn off 1313 NR.
4 Press one of the function buttons and prepare
the source to be recorded.
To record
from a CD, press the CD button
and load the
disc(s).
To record from a radio broadcast,
press the TUNER
button
and tune in to a station.
To record
from
the connected
source,
press the VIDEO/
AUX button
and play.
5 Press
the •
REC/REC
MUTE button
to start
recording.
When
the selected
function
is CD, playback
and recording
start simultaneously.
To erase
a recording
Make sure the microphone
is not connected
to this unit.
1 Insert the tape to be erased
into deck 2 and press the TAPE/
DECK
1/2 button to display "TAPE 2".
2 Set the tape to the point where the erasure
is to be started.
3 Set the reverse
mode by pressing
the REV MODE button.
4 Press the •
RECiREC
MUTE button
to start the erasure.
13 ENGLISH
